Product Overview
- This is a complete 6” lift kit for the 2007-2020 Toyota Tundra
- This kit lifts the front 6 inches and 4 inches in the rear
- Covered by our Limited Lifetime Warranty
- Steering knuckles, cross-members, differential spacers, strut spacers/preload spacer, rear Superlift or Fox® shocks, skid plate, and rear blocks
- Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
- The best customer service and technical help in the industry
Superlift’s 6-inch lift kits for the 2007- 2020 Toyota Tundra are a great way to add height to your overall Tundra’s appearance and now feature Superlift Shocks OR Fox® Performance Series 2.0 IFP Shocks. Superlift’s Suspension Lift Kits have a strong, modern die-formed design constructed of solid steel giving your truck a strong suspension. Superlift Suspension intentionally over-builds our suspension kits to be the best. Our uniquely engineered design adds strength and durability and has bonus features that others do not offer. The 6-inch lift kit for the Toyota Tundra is a complete replacement knuckle kit.
This kit includes front knuckles, front strut spacers, lower control arm cross-members, a rear block kit, and rear Superlift OR Fox® shocks. All required parts are included to make sure your Tundra handles and performs in all conditions.
Features:
Adds clearance up to 35” diameter tires
Ductile Iron Steering Knuckles
Full “Belly” Skid Plate.
HD Outer Tie Rod Ends
Rear lift is achieved with Block & U-bolt Kit
Levels the truck front to rear
Shock Options: Superlift Shocks or Fox® 2.0 Shocks
Backed by our Limited Lifetime Warranty
Benefits:
Retains OEM caster and camber alignment specifications
No excessive ball joint or steering components
CV axle angles are in the stock parameters
Maintains stock like ride quality and handling
Technical Notes:
Does not fit Tundra Models – TRD Pro, Rock Warrior, Or XSP-X Models
Will NOT work on 2016 TRD Pro (Bilstein Piggyback Strut) Models
Cutting and Drilling is required
Cannot run the factory 18” wheel
Aftermarket 18” wheels require at 5” or less back spacing.
See Recommend tire and wheel combinations
Do Not combine with any other suspension lift
Tire/Wheels:
| Tire | Wheel | Backspacing | Offset |
| 35 x 12.5 | 18 x 9 | 5 | - |
| 35 x 12.5 | 20 x 9 | 5.5 | - |
| 35 x 12.5 | 22 x 9 | 5.5 | - |
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these important factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.
